Cockpit Table Installation Notes
1. Position and align top mount to allow table to clear floor by 1″-2″ when folded down. Position tube clamps in relief routed on back side of mount and around pedestal. Drill 7/64″ x 5/8″ deep starting holes and attach tube clamps; secure the inside screws first. Note: Attach a flat brass hook and screws on face of table leaves (if desired) to prevent leaves from opening while underway.
2. Pinning is required on the under carriage support. Table may be adjusted for level and then pinned at the end opposite the piano hinge and under the table. Drill 5/8″ deep.
3. Open the leaves by pushing outward on the long fiddles.
ALL PRODUCTS: Maintain with teak oil or varnish. Cover where and when appropriate.
All products are guaranteed to meet specifications. For additional information, phone or fax (360) 376-2975 or 1-800-899-3996.